|
|
 |
|
 |
|
 |
|
| Belt Sander Tip |
| This trick of the trade will put some life back into your sanding tools |
|
|
|
|
This Abrasive Restorer product is cheap and simple to use. It is used to clear the clogging and build up of particles when using sanding discs and belts.
1
Simply place the product on top of the moving sander, and apply a little pressure so that the product presses on the rotating belt or disc.
2
It is similar to a very large rubber, and that's exactly how it gets rid of the particles which cause clogging. Using this will extend the life of your sandpaper belts and discs, which can be pricey.
|
Cost
Total Cost : $6.00 - $8.00
|
More Info
Abrasive Restorer: available from all good hardware stores.
|
Disclaimer
All Fact Sheets and other material on the Our House website are provided as a general information service only and should not be relied upon as a substitute for the advice of a properly qualified tradesman. Neither ninemsn nor its licensors (including the Nine Network) assume or accept any responsibility for, and will not be liable for the accuracy or appropriate application of any information whatsoever in any Fact Sheet or other material on the Our House web site. Your use of the Our House web site is governed by this disclaimer and the ninemsn's Terms of Use.
|
|
|
|
|
